How Many Teaspoons/Tablespoons Does a Coffee Scoop Hold?

How many tablespoons or teaspoons is a coffee scoop? This question has been on the minds of many coffee drinks and enthusiasts.

The fact of the matter is that it can be difficult to answer this question. After all, coffee scoops come in different shapes and sizes.

However, not to worry. Today, we will look at different coffee scoops and sizes, and how to choose the right one to make an excellent cup of java. So, without further ado, let’s begin, shall we?!

A Coffee Scoop Can Hold Around Two Tablespoons or Six Teaspoons of Coffee

A traditional scoop can hold around one tablespoon, or 15ml, of liquid. However, this can change depending on your choice of coffee scoop.

Typically, one tablespoon is around three teaspoons. But, in the US, a coffee scoop can hold twice the amount of coffee grounds compared to a liquid measure.

This means a US coffee scoop can hold two tablespoons, or six teaspoons, of ground coffee. 

Scoop Size Can Vary Depending on the Coffee Type

If you’re a heavy coffee drinker, there is a high chance that your cup of Joe is always filled to the brim. Ultimately, many people get their daily jolt from coffee, which can be made in various ways.

But, if your favorite brewing technique calls for a coffee scoop to measure coffee grounds and water, now is the time to reconsider what you previously believed to be a typical scoop.

As per the NCA (National Coffee Association), coffee drinkers should measure coffee grounds according to weight rather than volume.

This is the case because some coffee scoops might only hold around fifteen grams of grounds while others might hold around thirty grams.

Furthermore, this weight depends on whether you use a French press, dripper, espresso machine, or percolator to brew coffee.

For instance, if you’re using a dripper to make coffee, you will need two tablespoons of grounds for every six ounces of water.

On the other hand, if you’re using a percolator to make one cup, you will need two to three tablespoons of coffee grounds.

You Can Measure Coffee Beans with a Coffee Scoop

Even though you don’t have to buy a real coffee scoop, purchasing one has several advantages.

For instance, it is simpler to sweep the beans into your grinder or scale without spilling them because a dedicated scoop is skinnier than a dry measuring spoon.

Moreover, it is also easier to scoop coffee beans into your coffee grinder because it has a flat bottom and curved sides.

That said, you don’t need to purchase a standalone coffee scoop to measure coffee beans accurately. Instead, you can eyeball it using a tablespoon or an ordinary dry measuring spoon.

For example, you can scoop out beans using a tablespoon and level them off using a fork or the back of a knife. When using a dry measuring spoon, use it to scoop coffee beans until it is full.

Always Level Your Coffee Scoop

Some coffee beans are very costly. This is why many coffee drinkers go out of their way to ensure they don’t waste even a single coffee bean.

Some people use a generic or old measuring scoop to reduce their coffee expenses.

In fact, you will never go wrong if you utilize this method for your morning cup of java, as it costs you around one dollar for a hundred scoops.

But you should be aware of the downsides of using this measuring technique. According to your coffee scoop’s size, it can hold around four to eight grams.

Therefore, if you’re using generic or old scoops, you might not be measuring your coffee accurately. It is especially true for people who make coffee using espresso machines.

Ultimately, one shot of espresso requires around seven grams of coffee grounds. So, it would be wise to ensure that you measure everything to the last decimal point.

For instance, if your measure is off by even 0.5 grams, you could end up losing around three to four percent of caffeine from your final cup.

To avoid such an issue, you can level your coffee scoop with the coffee container you want to use. Doing so will allow you to get your measurements right and make a mean cup of Joe.

Which Type of Coffee Scoop Should You Get

You’ve carefully chosen a fantastic coffee maker, your preferred brand of coffee, and your favorite coffee mug. But have you given any thought to the coffee scoop you need to get? Probably not!

On that note, here’s a guide to the different types of coffee scoops available in the market, their features, and the one you should get.

Stainless-Steel Coffee Scoop

Firstly, stainless steel coffee scoops are easy to wash. In fact, you can put them in your dishwasher with other kitchen utensils without worrying about damaging them.

Secondly, these scoops are stain and scratch-resistant. This means they won’t decolorize or rust over time.

Thirdly, stainless steel coffee scoops are sturdy. In fact, it will be difficult to damage them even if they continuously fall on the floor.

Lastly, stainless steel coffee scoops are germ-free. They are made from a non-porous material that doesn’t allow germs to penetrate their surface.

Ceramic Coffee Scoops

Firstly, lead or other substances not safe for consumption are found in the glaze used to give ceramic scoops their shiny and smooth appearance.

Secondly, ceramic-based scoops are extremely fragile. A single drop would cause them to shatter into pieces.

Lastly, ceramic scoops get chipped over time. This can allow bacteria to leach into the coffee scoop itself.

Plastic Coffee Scoops

Firstly, most plastic coffee scoops have bisphenol A (BPA). BPA can harm human health and can leach into food or beverages.

Secondly, plastic scoops can get scratched with continuous use, trapping bacteria inside them.

Lastly, bacteria trapped in these scratches means you will never be able to clean your plastic scoop fully.

At the end of the day, stainless steel scoops are the way to go. This is especially the case if you want to make a clean cup of coffee and keep using your scoop for a long time.

Some Good Coffee Scoops

Here are a few coffee scoops from well-known brands you can add to your coffee-making kit.

Amerigo Premium Coffee Scoop

The excellent coffee scoop comes as a single piece. It is manufactured using a single sheet of stainless steel, meaning the handle will never break apart.

But, the best thing about the Amerigo is that it has metric and imperial markings engraved on the scoop itself.

This feature will allow you to accurately measure your coffee grounds whenever you decide to make a cuppa.

Coffee Gator Grinder Brush and Coffee Scoop

The Coffee Gator coffee scoop is constructed using sturdy stainless steel. This reason alone makes it the scoop to purchase as it will last you a long time.

But, the best thing about it is that it can pour exactly two tablespoons of coffee grounds. That is exactly how much one scoop of coffee should hold.

Supreme Housewares Stainless Steel Coffee Scoop

The Supremo coffee scoop is constructed using 18/8 SS.

This coffee scoop is washable and can be cleaned using a washing machine. The scoop weighs around 1.6 ounces and has a dimension of 7 by 3 by 1.4 inches.

How to Measure Coffee Grounds for the Perfect Cup

Everyone likes to keep track of everything we do in our daily lives. For instance, we keep track of our caloric intake, health, and, most importantly, time.

The same should be the case when it comes to measuring coffee grounds. After all, making a fresh cup of coffee that tastes different every time you brew it will annoy even the best of us.

This is why measuring out your coffee grounds is vital to ensure you make that perfect cup of Joe every time.

Of course, accuracy is all about weighing your grounds. So, a high-quality digital kitchen scale will enable you to measure the perfect water to coffee-ratio.

As a rule of thumb, you should add around 0.36 ounces or ten grams of coffee grounds to six ounces of water.

However, if you’re not adventurous, you can simply purchase a coffee scoop and use that instead. In fact, you can completely ditch the coffee scoop and use a tablespoon instead.

Although, don’t forget that one scoop holds around two tablespoons of ground coffee. So, if you take the tablespoon route, ensure that you use two tablespoons per six ounces of water.

Wrapping Up

There is no doubt that coffee makes the world go round. However, knowing the amount of coffee that goes into an average coffee scoop will allow you to get the perfect brew every time.

That said, there are two separate units for measuring coffee grounds. The first one is the American standard (tablespoons), and the second one is the metric standard (grams).

Typically, if you’re brewing two to three cups of coffee, you will need around eight tablespoons of coffee grounds. But that depends on how strong or caffeinated you prefer your coffee.

At the end of the day, if you’re accurate with your measurement, you won’t have any issues making the best cup of coffee you will ever have!

Other articles you may also like